Panel 1 (Bottom) Thickness Min. |
N/A 1 mm |
Panel 1 (Bottom) Mounting Hole B + 0.08 |
N/A 5.41 mm |
| Panel 2 (Top) Thickness Range1 | N/A 1.00 to 1.80 mm |
| Panel 2 (Top) Mounting Hole A +0.082 | N/A 4.00 mm |
| Panel 1 (Bottom) Hardness Max.3 | N/A HRB 50 / HB 82 |
Panel 2 (Top) Hardness Max. |
N/A No limit |
| Panel 1 Material4 | N/A Metal |
Panel 2 (Top) Material |
N/A PC Board or Metal |
L - Length ± 0.13 |
N/A
14 mm
 |
B ± 0.13 |
N/A 4.78 mm |
C Max. |
N/A 5.39 mm |
H ± 0.13 |
N/A 6.35 mm |
P ± 0.13 |
N/A 3.58 mm |
Panel 1 (Bottom) Edge Distance C1 Min. |
N/A 6.60 mm |
Panel 2 (Top) Edge Distance C2 Min. |
N/A 2.54 mm |
Standard Material |
N/A Aluminum |
Standard Finish |
N/A Plain |
Anvil Hole Diameter |
N/A 5.49 - 5.56 |
CAD Supplier |
N/A PennEngineering® (PEM®) |
- 1 Available for thicker boards on special order.
- 2 Available for thicker boards on special order.
- 3 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.
- 4 Type SSA standoffs can be installed into cold-rolled steel provided hardness is less than HRB 50. HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.
