Thread Size |
N/A .190-32 (#10-32) |
Thread Code |
N/A 032 |
Length Code |
N/A 10 |
Material Code |
N/A S |
Style |
N/A #3 |
Shank |
N/A Long |
| Min. Sheet Thickness1 | N/A .093 in |
Blind Mounting Hole Diameter + .003 - .000 |
N/A .344 in |
| Min. Depth of Blind Hole2 | N/A .075 in |
L - Length + .002 –.005 |
N/A
.625 in
 |
A Max. |
N/A .072 in |
| B Max.3 | N/A .290 in |
C Max. |
N/A .343 in |
H Nom. |
N/A
.375 in
 |
Min. Dist. Hole C/L to Edge |
N/A .281 in |
For Use in Sheet Hardness |
N/A HRB 70 / HB 125 or Less |
Thread Specification |
N/A Internal, ANSI B1.1, 2B |
Fastener Material |
N/A 300 Series Stainless Steel |
Standard Finish |
N/A Passivated and/or tested per ASTM A380 |
CAD Supplier |
N/A PennEngineering® (PEM®) |
Min. Depth Full Thread F |
N/A .375 in |
- 1 For maximum performance, we recommend that you use the maximum shank length for your sheet thickness.
- 2 Blind mounting holes may be deeper than minimums except where sheet material is at or near minimum thickness. Fasteners should always be installed so the flange is flush with the surface of the sheet.
- 3 If standoff is used as a bushing, the hole in attached part must not exceed “B” plus .020” / 0.51 mm.
