Thread Size x Pitch |
N/A M3 x 0.5 |
Type |
N/A Knurled Cap - PF11MW |
Thread Code |
N/A M3 |
| Shank Code1 | N/A 1 |
Screw Length Code |
N/A 1 |
A Max. Sheet Thickness |
N/A
1.60 mm
 |
B Min. |
N/A 2.82 mm |
D Hole Size in Sheet + 0.08 - 0.03 |
N/A 6.35 mm |
E ± 0.25 |
N/A 10.59 mm |
G Nom. |
N/A 5.84 mm |
H Min. |
N/A 9.52 mm |
L1 Nom. |
N/A 3.48 mm |
L2 Max. |
N/A 3.23 mm |
T1 Nom. |
N/A 7.87 mm |
T2 Nom. |
N/A 11.43 mm |
Driver Size |
N/A
Slotted/#1 Phillips
 |
Min. Float |
N/A 1.85 mm |
W Nom. |
N/A 7.92 mm |
| Thread Specification2 | N/A ANSI/ASME B1.13M, 6g |
Material Knob |
N/A Aluminum |
Material Retainer |
N/A Aluminum |
Material Screw |
N/A Heat-Treated Carbon Steel |
Material Spring |
N/A 300 Series Stainless Steel |
Material Washer |
N/A 300 Series Stainless Steel |
Finish Knob |
N/A Natural Finish |
Finish Retainer |
N/A Natural finish |
Finish Screw |
N/A Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless |
Finish Spring |
N/A Natural Finish |
CAD View |
N/A Fastened |
CAD Supplier |
N/A PennEngineering® (PEM®) |
CAD Note |
N/A Mating washers for PF11MW / PF12MW panel fasteners are not shown in 3D drawings. |
