These standoffs offer oversized body for increased bearing surface, wall thickness and performance.
Request Information
Unit of Measure

Thread Size x Pitch

 N/A M2.5 x 0.45

Thread Code

 N/A 6M25

Length Code

 N/A 200
Style1 N/A #1
Min. Sheet Thickness2 N/A 0.63 mm

Hole Size in Sheet + 0.08

 N/A 5.41 mm

C - 0.13

 N/A 5.39 mm TSO4_Dwgs.jpg

F - Min. Thread Depth

 N/A 5.2 mm

H - Nom.

 N/A 6.4 mm
L - Length ± 0.083 N/A 2 mm

Min. Dist. Hole C/L to Edge

 N/A 7.10 mm
For Use in Sheet Hardness4 N/A HRB 88 / HB 183 or Less

Thread Specification

 N/A Internal, ASME B1.13M, 6H

Fastener Material

 N/A Heat treated 400 Series Stainless Steel

Standard Finish

 N/A Passivated and/or Tested Per ASTM A380
  • 1 Style #1 - Thru-threaded.
    Style #2 - Screw might not pass through unthreaded end. Tapped to minimum full thread depth shown. Incomplete threads on tap may allow screw to pass through.
    Style #3 - Blind.
  • 2 For maximum performance, we recommend that you use the maximum shank length for your sheet thickness.
  • 3 Available in other lengths on special order.
  • 4 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.