Thread Size x Pitch |
N/A M6 x 1 |
Type |
N/A Knurled Cap - PF11MW |
Thread Code |
N/A M6 |
| Shank Code1 | N/A 1 |
Screw Length Code |
N/A 2 |
A Max. Sheet Thickness |
N/A
1.6 mm
 |
B Min. |
N/A 3.25 mm |
D Hole Size in Sheet + 0.08 - 0.03 |
N/A 10.49 mm |
E ± 0.25 |
N/A 14.61 mm |
G Nom. |
N/A 10.41 mm |
H Min. |
N/A 13.48 mm |
L1 Nom. |
N/A 3.99 mm |
L2 Max. |
N/A 3.56 mm |
T1 Nom. |
N/A 13.46 mm |
T2 Nom. |
N/A 20.07 mm |
Driver Size |
N/A
Slotted/#3 Phillips
 |
Min. Float |
N/A 2.06 mm |
W Nom. |
N/A 11.89 mm |
| Thread Specification2 | N/A ANSI/ASME B1.13M, 6g |
Material Knob |
N/A Aluminum |
Material Retainer |
N/A Aluminum |
Material Screw |
N/A Heat-Treated Carbon Steel |
Material Spring |
N/A 300 Series Stainless Steel |
Material Washer |
N/A 300 Series Stainless Steel |
Finish Knob |
N/A Natural Finish |
Finish Retainer |
N/A Natural finish |
Finish Screw |
N/A Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless |
Finish Spring |
N/A Natural Finish |
| Optional Finish3 |
N/A
Knob (aluminum) – Black Anodize Screw (steel and stainless) – Black Nitride |
CAD View |
N/A Fastened |
CAD Supplier |
N/A PennEngineering® (PEM®) |
CAD Note |
N/A Mating washers for PF11MW / PF12MW panel fasteners are not shown in 3D drawings. |
- 1 Other shank and screw lengths available.
- 2 As with all external plated threads, Class 2A/6g, the maximum major and pitch, after plating, may equal basic sizes and be gauged to Class 3A/4h, per ANSI B1.1, Section 8, Table 3A and ANSI B1.13M, Section 8, Paragraph 8.2
- 3 “BL” suffix will be added to part number to designate DuraBlack™ finish.
