Item # SOSG-6440-16, Grounding Standoffs - Types SOSG, SOAG

These standoffs, which use the proven self-clinching design, install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.

Types SOAG and SOSG grounding standoffs are designed for clinching into steel or aluminum chassis while the “gripping teeth” on the opposite end of the standoff firmly contact mating PC board.

If you require a standoff which we do not offer in this bulletin, please contact us. We will be happy to work with you to satisfy your specialmore

Unit of Measure

Specifications

Thread Size	N/A .112-40 (#4-40)
Thread Code	N/A 6440
Length Code	N/A 16
Min. Sheet Thickness¹	N/A .040 in
Hole Size in Sheet + .003 - .000	N/A .213 in
C + .000 - .005	N/A .212 in
H ± .005	N/A .250 in
L - Length + .010 –.000²	N/A .500 in
P Nom.	N/A .030 in
Anvil Hole Diameter + .003 -.000	N/A .216 in
Min. Dist. Hole C/L to Edge	N/A .27 in
For Use in Sheet Hardness³	N/A HRB 70 / HB 125 or Less
Thread Specification	N/A Internal, ANSI B1.1, 2B
Fastener Material	N/A 300 Series Stainless Steel
Standard Finish	N/A Passivated and/or tested per ASTM A380
CAD Supplier	N/A PennEngineering® (PEM®)

¹ For maximum performance, we recommend that you use the maximum shank length for your sheet thickness.
² For special lengths greater than .500” / 12 mm, Types SOSG and SOAG are blind threaded.
³ HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.

Specifications

Thread Size

Thread Code

Length Code

Hole Size in Sheet + .003 - .000

C + .000 - .005

H ± .005

P Nom.

Anvil Hole Diameter + .003 -.000

Min. Dist. Hole C/L to Edge

Thread Specification

Fastener Material

Standard Finish

CAD Supplier