These standoffs, which use the proven self-clinching design, install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.

When blind-threaded types are used, outer sheet surfaces are not only flush, but closed as well.

If you require a standoff which we do not offer in this bulletin, please contact us. We will be happy to work with you to satisfy your special need.
Request Information
Unit of Measure

Thread Size x Pitch

 M3 x 0.5

Thread Code

 M3

Length Code

 10
Min. Sheet Thickness1 1.0 mm

Hole Size in Sheet + 0.08

 4.22 mm

C - 0.13

 4.2 mm
a1351.jpg

F Min.

 4.00 mm

H Nom.

 4.8 mm

L - Length +0.05 –0.13

 10 mm

Min. Dist. Hole C/L to Edge

 6.00 mm
For Use in Sheet Hardness2 HRB 80 / HB 150 or less

Thread Specification

 Internal, ANSI/ASME B1.13M, 6H

Fastener Material

 Heat-Treated Carbon Steel

Standard Finish

 Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless

CAD Supplier

 PennEngineering® (PEM®)
  • 1 For maximum performance, we recommend that you use the maximum shank length for your sheet thickness.
  • 2 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.