Item # TMSO4-080-125, PEM® Type TMSO4™ Self-clinching microPEM® Standoffs - Unified On Zygology

Zygology Ltd
Unit 7, Thame 40 Jane Morbey Road
Thame Oxon OX9 3RR
Phone: 0808 123 1221
Fax: +44 1844 266021
Email: sales@zygology.com
Web Address: www.zygology.com

Print Back

PEM® Type TMSO4™ Self-clinching microPEM® Standoffs for Thin Sheets
Designed for use in harder sheets, hardness HRC 37/HB 340 or less

Installs flush into half hard .008” / 0.2mm stainless steel sheets
Installs into round holes without any special mounting hole preparation, eliminating adhesives and laser welding
Allows for light weighting and optimizing designs
Can be installed automatically.

Unit of Measure

Specifications

Thread Size	N/A .060-80 (#0-80)
Min. Sheet Thickness¹	N/A .008 in
Hole Size in Sheet +.002 - .000	N/A .128 in
C Max.	N/A .125 in
H Nom.	N/A .159 in
L +.002 -.003	N/A .125 in
Min. Dist. Hole C/L to Edge	N/A .125 in
Anvil Chamfer Dia. A	N/A .115-.114 in
Anvil Length	N/A .250 in
Thread Specification	N/A ASME B1.1, 2B
Fastener Material	N/A Hardened 400 Series Stainless Steel
Standard Finish	N/A Passivated and/or tested per ASTM A380
For Use in Sheet Hardness²	N/A HRC 37 / HB 340
CAD Supplier	N/A PennEngineering® (PEM®)
PHH	N/A 0.075 in

¹ For maximum performance, we recommend that you use the maximum shank length for your sheet thickness.
² HRC - Hardness Rockwell “C” Scale. HB - Hardness Brinell