Type SMPS self-clinching nuts are for installation into ultra-thin sheets. They feature a lower profile and can be mounted closer to the edge of a sheet than other self-clinching nuts.
  • Installs into sheets as thin as 0.64 mm.
  • Recommended for use in sheets HRB (Rockwell “B” scale) 70 or less and HB (Hardness Brinell) 125 or less.
Request Information
Unit of Measure

Thread Size x Pitch

 N/A M2.5 x 0.45

Thread Code

 N/A M2.5

A (Shank) Max.

 N/A 0.61 mm a1384.jpg
Min. Sheet Thickness1 N/A 0.64 mm

Hole Size in Sheet + 0.08

 N/A 3.8 mm

C Max.

 N/A 3.79 mm

E ± 0.25

 N/A 5.60 mm

T ± 0.25

 N/A 1.40 mm

Min. Dist. Hole C/L to Edge

 N/A 3.7 mm

For Use in Sheet Hardness

 N/A HRB 70 / HB 125 or Less

Thread Specification

 N/A Internal, ASME B1.13M, 6H

Fastener Material

 N/A 300 Series Stainless Steel

Standard Finish

 N/A Passivated and/or Tested Per ASTM A380

CAD Supplier

 N/A PennEngineering® (PEM®)
  • 1 For maximum performance, we recommend that you use the maximum shank length for your sheet thickness.