CAD (0) ▾
  • Cart is empty
  1. Request CAD files
PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove – creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.

FH (flush-head) studs are available in aluminum, steel, ormore
Unit of Measure
Items
Flush-head studs - FH, FH4, FHA, FHP, FHS

Self-Clinching Threaded Studs - Type FH/FHS/FHA - Unified
Flush-head studs - FH, FH4, FHA, FHP, FHS

Self-Clinching Threaded Studs - Type FH/FHS/FHA - Unified
Flush-head studs - FH, FH4, FHA, FHP, FHS

Self-Clinching Threaded Studs - Type FH/FHS/FHA - Unified
Flush-head studs - FH, FH4, FHA, FHP, FHS

Self-Clinching Threaded Studs - Type FH/FHS/FHA - Unified
Flush-head studs - FH, FH4, FHA, FHP, FHS

Self-Clinching Threaded Studs - Type FH/FHS/FHA - Unified
Thread Size N/A .086-56 (#2-56) N/A .112-40 (#4-40) N/A .138-32 (#6-32) N/A .164-32 (#8-32) N/A .086-56 (#2-56)
Thread Code N/A 256 N/A 440 N/A 632 N/A 832 N/A 256
Length Code N/A 4 N/A 4 N/A 4 N/A 4 N/A 5
Material Code N/A
Min. Sheet Thickness1 N/A .040 in
Hole Size in Sheet + .003 - .000 N/A .085 in N/A .111 in N/A .137 in N/A .163 in N/A .085 in
Max. Hole in Attached Parts N/A .105 in N/A .135 in N/A .160 in N/A .185 in N/A .105 in
L - Length ± .015
N/A .250 in
a1374.jpg
 		N/A .250 in
a1374.jpg
 		N/A .250 in
a1374.jpg
 		N/A .250 in
a1374.jpg
 		N/A .312 in
a1374.jpg
H ± .015 N/A .144 in N/A .176 in N/A .206 in N/A .237 in N/A .144 in
S Max.2 N/A .075 in N/A .085 in N/A .090 in N/A .090 in N/A .075 in
Min. Dist. Hole C/L to Edge N/A .187 in N/A .219 in N/A .250 in N/A .281 in N/A .187 in
For Use in Sheet Hardness N/A HRB 80 / HB 150 or less
Thread Specification N/A External, ANSI B1.1, 2A
Fastener Material N/A Heat-Treated Carbon Steel
Standard Finish N/A Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless
Optional Finish N/A
CAD Supplier N/A PennEngineering® (PEM®)
  • 1 For maximum performance, we recommend that you use the maximum shank length for your sheet thickness.
  • 2 Threads are gageable to within 2 pitches of the “S” Max. dimension. A class 3B/5H maximum material commercial nut shall pass up to the “S” Max. dimension.